SI2 Micro Integration Line, Line stage
Front Panel
- INPUT 1, 2 Selector Switch : Switch for selecting between INPUT 1 and INPUT 2. Time lag in switching between 2 inputs is normal due to use of electronic switch.
- Volume Control : Knob to adjust volume level by controlling electronic volume control.
- POWER ON LED : Power is ON when this LED is illuminating in red. The Line Stage is designed to be ON at all times. Unplug AC adaptor from AC outlet when the Line Stage is not in use for a prolonged time.
- INPUT 1-2 : Audio input terminals. Line level input signals such as CD, DVD(AUDIO), Tuner can be used.
- OUTPUT : Audio output terminals. The output is connected to devices such as power ampli ers. Since electronic volume control signal comes directly out to these terminals, high capacitance and long cables can not be used. Use low capacitance and short cables for connection to power amps (1M or less recommended).
- DC INPUT : Connector for AC adaptor plug. Do not use AC adaptors other than what comes supplied with the Line Stage.
- Please refer to the instructions for such optional power supplies when using them.
| Inputs | 2 Line Level Inputs, Single Ended (RCA)/100Kohm |
|---|---|
| Outputs | 1 Pair Single Ended (RCA) |
| Phase | Polarity Non Inverting |
| Gain | 0 dB |
| Attenuation Renge | 0 to -79dB |
| Signal Noise | >100dB |
| Stereo Separation | >100dB |
| Power Requirements | 12V DC / 300mA (Center +) |
| Dimensions | 106mm(W) x 45.6mm(H) x 110mm(D) |
| Net Weight | 700g |
